Does autodesk inventor 2015 replace 2013

Does autodesk inventor 2015 replace 2013 full#

Find this in the list of iMates in your model browser, right click and select Properties. the insert iMate which defines the insertion point of the fastener. During the authoring stage, when the iMates are placed on the stud, but before you publish the part to the Content Center, one of the iMates needs to be modified. It occurred to me last night that I did not explain how I got the leading edge of the stud to protrude from the nut and washer as shown in that first image.

I can now take this family and copy it as many times as I need for different materials and specs.

Does autodesk inventor 2015 replace 2013 full#

Once I added all of my part numbers and other custom information, I was able to save and had a full table of useable studs. I saved it and closed, returning me to the Family Table editor in Inventor, with all of the sizes and lengths that were in the original hex head table. With both tables open in separate sessions of Excel Р’В®, I copied the contents of the former Hex Head table into the more recent Stud table. Then, back in Inventor I edited the family table of the stud part and opened it using Excel Р’В®. I removed any columns form the table that did not apply to my stud part model, and added a few for iproperties that I am mapping to and from Vault. I closed this editing session without saving any changes, and proceeded to edit the new spreadsheet I had saved.

With the Family Table open in Excel Р’В®, I saved the file out to a working location, so I could edit it without harming the Hex Head family. Hex Head Family Table w Excel Р’В® Edit Button So, once the part was in the CC, I opened up the Family Tab e of a Hex Head bolt, and edited it using Microsoft Excel Р’В®. But thatРІР‚в„ўs ok, I didnРІР‚в„ўt feel like manually adding all of those different diameter and length combinations. Since I did not create this part as an iPart, there was only the one size available when I published the part to the Content Center. As long as everything is assigned, this part will successfully Publish as a Hex Head, and will be recognized by Bolted Connections. Next I mapped the required Hex Head parameters to those in my model that I had created. Under category I selected Hex Head and selected the three iMate locations. Once I had the model created and saved, I used the Author tool on it. For Head Height and Grip Length, I created user parameters that I could easily tabulate in the Content Center. Nominal Length and Nominal Diameter were easy, I used model parameters for these, as well as the thread information. I was more concerned about making sure I had all the right information for those required mappings. With this information handy, I set about creating my stud part. regardless of what it looked like.Р”В¬omponent Authoring Parameter Mapping Tab This tab gave me a list of the required parameters for authoring an item as Hex Head boltРІР‚В¦. Here part or user parameters are mapped to required authoring parameters. The next tab on this window is the Parameter Mapping tab. These three create iMates on the part which are used when the bolt is placed either manually form the Content Center, by using the CCРІР‚в„ўs Auto Drop feature, or from InventorРІР‚в„ўs Bolted Connection interface. Here you designate the Placement Edge, Cylinder Axis, and then an Orientation Plane for placement. The Component Authoring command window has two tabs, the first of which shows the physical layout of the authoring. For a fastener this command is on the Manage Tab of the ribbon, in the Author panel. You can view the way a Contrent Center part is authored by re-authoring it. My intent was to deconstruct it and see how it had been authored and published.

To get started on this, I first opened a Hex Head bolt form the Content Center, as custom, and saved it into my playing around folder. The trick? Make Inventor think your studs are actually hex head bolts! This tip gives a workaround that allows you to use Bolted Connections with studs. For sure there are no ANSI standard studs. InventorРІР‚в„ўs Bolted Connection wizard on the Design Accelerator does not have the ability to include studs in a connection, nor are there very many stud families in the Content Center. In our industry, most flanged connections are held together with studs, nuts and washers of various materials. Most of the work that I do involves using Autodesk Р’В® InventorРІР‚в„ўs Tube & Pipe feature. Typical Flanged Connection with Stud Fasteners